10 Ton • Ideal Air units are manufactured at an ISO 9001 registered facility and each rooftop is completely computer-run tested prior to shipment.
Unit Features • Standard Cabinet with Composite Drain Pan • Two Stage Cooling • 36 kW Factory Installed Electric Heat • Either supply and/or return can be field converted from vertical to horizontal configuration without cutting panels. • Unit Cabinet Constructed of Powder Painted Steel, Certified At 1000 Hours Salt Spray Test (ASTM B-117 Standards) • Full perimeter base rails with built in rigging capabilities • Scroll Compressors • Slide-out Blower/2 HP Belt Drive Motor Assembly • Unit Ships with 2″ Throwaway Filters • Solid Core Liquid Line Filter Driers • Replacement Filters: 4 – (24″ x 20″). Unit accepts 2″ or 4″ wide filters. • Short Circuit Current: 5kA RMS Symmetrical • Through-the-Curb and Through-the-Base Utility Connections • Single Point Power Connection • 2-Pass Microchannel Condenser Coil, Copper Tube/Aluminum Fin Evaporator Coil • Hinged Access Panels Standard Unit Controller: Simplicity Control Board • Safety Monitoring – Monitors the high and low-pressure switches, the freezestats, the gas valve, if applicable, and the temperature limit switch on gas and electric heat units. The unit control board will alarm on ignition failures, safety lockouts and re • An Integrated Low-Ambient Control, Anti-Short Cycle Protection, Lead-Lag, Fan On and Fan off Delays, Low Voltage Protection, On-Board Diagnostic and Fault Code Display. Allows all units to operate in the cooling mode down to 0 °F outdoor ambient without BAS Controller • Simplicity SE Controller including Discharge Air, Return Air, and Outdoor Air Temperature Sensors
ArticaUSA is an Authorized dealer of “10 Ton Drifecta ISO 9001” Air Unit
Please know It’ll be 6 to 8 weeks after approval of the order to install the unit .